STAYBULL MULTI-BASE™ LADDER & ROOF STABILIZER
- Regular price
- $299.00
- Sale price
- $299.00
- Regular price
-
STAYBULL MULTI-BASE™ Ladder & Roof Stabilizer includes the patented MULTI-BASE™ platform with pre-installed BullGrip™ traction pads for stabilizing compatible ladders and creating a more secure working surface on floors, outdoor terrain, shingles, and pitched roofs. Available with standard BullGrip™ pads or optional BullGrip™ Metal Pads for metal-roof applications. Designed for professional contractors, installers, maintenance crews, and tradespeople who need greater stability across changing jobsite conditions.
With more than 300 sq. in. of gripping surface, a wide load-distributing footprint, recessed ladder-foot pockets, and pressure-activated traction, the MULTI-BASE™ helps reduce ladder movement while providing a versatile platform for demanding residential and commercial work.
Why Contractors Use the STAYBULL MULTI-BASE™
- 300+ sq. in. gripping footprint distributes load across a larger surface.
- Patented multi-purpose design works as both a ladder stabilizer and roof work platform.
- BullGrip™ traction pads increase grip as pressure is applied.
- Recessed ladder-foot pockets help limit ladder-foot movement under load.
- Integrated anti-slip tread provides additional traction when standing or stepping on the platform.
- Tool storage areas help keep hardware, fasteners, tools, and supplies within reach.
- Replaceable traction pads allow the platform to be configured for different surfaces.
- Roto-molded construction is built for repeated professional jobsite use.
- Made in the USA.
Ladder Stabilization on Flat & Uneven Surfaces
The MULTI-BASE™ creates a larger contact area underneath compatible ladders, helping provide a more controlled setup on hardwood, tile, laminate, decking, concrete, pavers, patios, uneven ground, sloped yards, and other common jobsite surfaces.
Molded ladder-foot pockets and backstops help keep ladder feet positioned within the platform while the traction pads underneath help resist movement against compatible surfaces.
Roof Work Platform
On compatible pitched roofing surfaces, the MULTI-BASE™ can also be positioned as a work platform for standing, kneeling, sitting, or keeping tools and materials nearby. This can make installation, maintenance, painting, repair, and other rooftop work more practical when used according to the manufacturer's instructions.
The molded platform includes convenient areas for tools, hardware, fasteners, and even a paint can, reducing the need to repeatedly move equipment while working.
Choose the Right BullGrip™ Pad
BullGrip™ Traction Pads – Included
Pre-installed general-purpose pads use a high-friction micro-suction surface designed for hardwood, tile, laminate, finished flooring, wood and composite decking, asphalt shingles, wood shakes, concrete, pavers, and many other common surfaces.
BullGrip™ Metal Pads – Optional
For standing-seam, corrugated, and other compatible metal roofing applications, optional BullGrip™ Metal Pads provide additional friction. The MULTI-BASE™ is designed to bridge common 12-inch and 16-inch O.C. metal roofing ribs.
Compatible Ladder Types
- Extension ladders
- Step ladders
- Combination ladders
- Telescoping ladders
Ladder compatibility depends on the ladder's outside width and inside rail spacing. Always confirm your ladder falls within the measurements below before use.
Ladder Fit Requirements
Outside width is measured from the outside edge of one ladder foot to the outside edge of the opposite ladder foot.
Inside width is measured between the inside faces of the ladder rails.
Common Applications
- Christmas light installation
- Roofline and exterior installation work
- Roof maintenance and repair
- Painting
- Gutter work
- General construction
- Residential maintenance
- Commercial service work
- Work on smooth interior flooring
- Deck and patio work
- Uneven or sloped ground
- Asphalt and architectural shingles
- Compatible metal roofs with BullGrip™ Metal Pads
Specifications
*Roof and slope performance depends on surface condition, roof pitch, pad selection, positioning, ladder configuration, weather, and other jobsite conditions.
What's Included
- 1 × STAYBULL MULTI-BASE™
- Pre-installed BullGrip™ general-purpose traction pads
- Fully assembled construction ready for use
Setup & Use Notes
Before each use, inspect the MULTI-BASE™, traction pads, ladder, and work surface. Position the unit so it is fully supported and confirm the ladder feet are properly seated within the molded ladder pockets before climbing.
When changing surface types, confirm that the appropriate BullGrip™ pads are installed. BullGrip™ Metal Pads should be used where recommended for compatible metal roofing applications.
The STAYBULL MULTI-BASE™ is designed to improve ladder and work-platform stability. It is not a fall-arrest or fall-protection device. Always follow the ladder manufacturer's instructions, inspect the work area before use, and comply with applicable jobsite, OSHA, fall-protection, and workplace safety requirements.
Recommended Add-On
Recommended when using the STAYBULL MULTI-BASE™ on compatible standing-seam, corrugated, or other metal roofing surfaces.
Shop BullGrip™ Metal Pads
The STAYBULL MULTI-BASE™ gives professional installers one versatile platform for ladder stabilization, difficult surfaces, and rooftop work—helping reduce the number of specialized accessories needed from job to job.
Made in the USA. Patented. Built for demanding jobsites.
No returns will be accepted after December 1st.
